Wire-Working Tools

Wig Jig Olympus (transparent). Versatile wire working tool, 5x5" clear acrylic square wire jig with 481 holes and 40 movable pegs. It comes with instructions plus 10 sample designs to get started. Use with 12- to 20-gauge wire.

Wig Jig Delphi. 3x3" square clear acrylic jig with 182 holes and 20 movable metal pegs. Transparent so you can put a pattern underneath. Best for delicate designs using fine (18 to 22-gauge) wire.

Delphi spiral maker. Quickly make spirals (to nearly 22mm) without plier marks! This works best with the WigJig® Delphi, but can be used without a jig. Instructions included.

Thing-a-ma-Jig Beginner. Plastic, 3x4", 256 holes. Package contains 20 moveable plastic pegs, three patterns and instructions. By Beadalon®.

Thing-a-ma-Jig Deluxe. Sturdy aluminum, 4x5", 676 holes. Package contains 26 moveable metal pegs, six patterns, one blank template and full instructions. By Beadalon®.

The Coiling Gizmo. Three-piece set includes two sizes of cranking rods, plus a stand/base. Quick and easy illustrated instructions included.

Eurotool® pin vise. Used to hold wire and rod, and often used when twisting wire. To twist wire, loop middle of wire over a peg, secure both ends in the vice, and use the vise to twist the wire.

Approx. 3x1" Eurotool® pocket wire-gauge tool. A must-have for beaders, wire wrappers and jewelers, this pocket-size tool measures wire and sheet metal from gauges 34 to 8. Shows both millimeter and inch equivalents for each gauge.

Eurotool® 1.2x4x3.5" ear-wire-making tool. Save money by making your own ear wires in just minutes! Works best with 20-gauge wire. Instructions included.

Jump-ring maker by Beadalon®. Kit includes clear round plastic base and four mandrels, for making 4mm, 6mm, 7mm and 8mm jump rings. Make consistent jump rings quickly and easily! Choose the perfect color, gauge and size for each project.

For such a simple looking tool, this is a big help when you're working with jump rings.

Miniature steel horn anvils, 1.7x4.4x1.1" (4.25x11x3cm).

Eurotool® approx. 5x0.4" cup bur with 0.8mm diameter cup and wooden handle. Use to eliminate sharp wire edges! After clipping wire, gently insert cut end into cup and rotate. The end of the wire will become smooth with a slight dome.

Wire Whacker by The Beadsmith®. Two 4x6" plates used for hardening your wire designs without distorting or changing the wire diameter.

Approx. 1.125x8.5x0.25" Eurotool® steel drawplates for straightening, work hardening and resizing wire. 82 round holes are highly polished and range from 2.5 to 0.12mm.

Approx. 3.5x2.5x0.75" Eurotool® rosewood drawplates with 12 smooth holes. Holes range from 6.5 to 1.2mm. Designed for reducing soft or woven chain.

Large jump-ring makers by Beadalon®. Kit includes clear round plastic base and 4 mandrels, for making 10mm, 12mm, 14mm and 16mm jump rings. Make consistent jump rings quickly and easily! Plus, choose the perfect color, gauge and size for each project.

Eurotool® Mister Twister hand coilers. The economical way to make your own jump rings and coils. Includes eight round metal mandrels (1, 2, 2.5, 3, 4, 5, 6 and 8mm). Mandrels are 7" long, with 6" usuable for coiling.

Oval jump-ring makers by Beadalon®. Kit includes clear oval plastic base and 3 mandrels, for making 4x6mm, 5x7mm and 6x8mm jump rings. Make consistent jump rings quickly and easily! Plus, choose the perfect color, gauge and size for each project.

Wire twisters by Beadalon®. Approx. 5" tall. Includes two pieces designed to twist up to five wires at one time! Use with ColourCraft® wire.

Flex-shaft system. No jeweler's bench is complete with out this power rotary tool for efficient cleaning, polishing, sanding, drilling and more. Includes 1/10hp motor, #30 style hand piece, foot control, flex shaft/sheath and chuck key.